High Power Laser Lights: How Many Watts Do You Need?

Powerful laser lights for shows: what the watts mean, how much laser power your venue needs from 1.2W to 10W, and why more power needs more care.

UPDATED 2026-10-18 READ 7 MIN
LaserCube Ultra MK2 laser projector with its mounting bracket and WiFi antenna

A high power laser light fills a dark room or an outdoor stage with sharp beams in the air (with a little haze), and draws logos and graphics on walls and buildings. How much power you need depends on the space, the light around it and the size of the crowd.

This guide explains what the watts mean, how much power a show needs, and why a more powerful laser needs more care. One thing first: even a high-powered LaserCube is a laser show projector, not a handheld pointer.

01

What the watts mean

A laser light's power is the light its lasers put out, in watts (W) or milliwatts (mW): 1W is 1,000 mW. It isn't the charger's wattage.

Every LaserCube combines red, green and blue lasers into one beam (16.7 million colors) and scans it to draw beams in the air and outlines on a surface. What each model puts out:

  • Ultra MK2 10W: 5,000 mW blue (455 nm), 2,800 mW green (525 nm) and 2,800 mW red (638 nm).
  • Ultra MK2 6W and Pro 6W: 2,800 mW blue, 1,500 mW green and 1,800 mW red.
  • Pro 3W: 1,350 mW blue, 850 mW green and 950 mW red.
  • WiFi 2.5W and 1.2W: 2,500 mW and 1,200 mW in total; the 2.5W also has better color.

You can turn the output down, in LaserOS or, on the Pro and Ultra MK2, in the cube's Image Setup menu.

02

What more power does for a show

  • Beams in the air: more laser power, darkness and a little haze or fog make beams much more visible. Light in the room makes them harder to see.
  • Haze: thin haze gives the clearest beams; too much turns them into a bright glow and washes out the colors. More in do you need fog for a laser show.
  • Picture size: it grows with the distance. At full size, every Pro and Ultra MK2 draws a picture about 0.7 times as wide as the distance, whatever its power (about 1.4 m at 2 m, 14 m at 20 m); the WiFi about half as wide. The farther away, the bigger and dimmer the picture.
  • Buildings and long distances: our team recommends the Ultra MK2 (up to 10W, our most powerful model).
  • Daylight: no LaserCube is made for projecting outdoors in daylight.

Beams have been seen up to about 500 m away in our tests, a top figure, not what every model or setting reaches. More in how far laser light can travel and why beams go invisible.

03

How much laser power do you need?

Our advice is the biggest model, unless you have a reason to go smaller: the Ultra MK2 10W, our most powerful. Within a model, more watts means a brighter light: beams in the air show more, and so does a picture far away.

Up to about 1,000 people indoors: Pro or Ultra MK2

The Pro (3W or 6W) and the Ultra MK2 (6W or 10W) each suit audiences of up to about 1,000 people indoors. The Pro 6W has the same laser output as the Ultra MK2 6W in a smaller, lighter body, and the Ultra MK2 10W is our most powerful model. The full comparison: Pro or Ultra MK2.

Up to about 500 people indoors, on a tight budget: WiFi

The WiFi 1.2W and 2.5W suit audiences of up to about 500 people indoors. They play from LaserOS on a phone, tablet or computer, with no DMX, ILDA or MIDI port.

More than about 1,000 people indoors: several cubes

Run several cubes in sync. The Pro and Ultra MK2 link wirelessly with Cube Link (about 20 to 40 m line of sight), or through Ethernet, Art-Net or DMX. Cubes of different power can be linked, for example a brighter cube in the middle and lower-power cubes at the sides.

Outdoors: the Ultra MK2 10W

The figures above are for indoor shows. For an outdoor or open-air show for a big audience, such as an open-air gig, a concert or a festival, go with the Ultra MK2 10W, our most powerful model: outdoors, more laser power, darkness and a little haze or fog make the beams much more visible, and for a bigger stage or crowd several Ultra MK2 10W in sync give more beams from more positions.

By venue: nightclubs, weddings and mobile DJs, medium indoor venues and outdoor laser shows. Compare models on the models page and prices on the LaserCube page; what a setup costs is in Laser Show Projector Price: How Much Does It Cost?

04

High power laser lights in the USA

The Pro isn't sold in the USA yet, so the Ultra MK2 is our professional model for US buyers. In the US, LaserCube is certified through X-Laser, and a LaserCube bought in the USA comes with the FDA variance (issued by X-Laser). For public shows, check your local rules too.

US units come with an E-Stop, and the beam won't turn on without it. US buyers of the Ultra MK2 10W or 6W pass a free online Laser Operator Course before it ships: either ours (based on X-Laser's course) or X-Laser's own; the link to ours comes by email once the order is paid. More in our FDA variance guide.

05

More power needs more care

The power that makes beams visible in a big space is also enough to cause serious eye injury, even from a very brief exposure. A LaserCube is for professional use, and these rules apply to every show:

  • Keep every beam at least 3 m (10 ft) above the floor wherever people may be. Set the beam block with the cube off and the key out, then switch on and check; repeat until nothing scans into audience areas.
  • Never aim at people or an audience, and never stand in front of the laser while it's on. Let every beam end in an area where nobody is, with a buffer of at least 3 m on all sides.
  • Outdoors, every beam ends on a solid surface such as a wall, a building or a screen. Never the sky or open airspace: a laser can interfere with aircraft many miles away, and in the US, shining one at an aircraft is a federal crime.
  • Never aim at metal, shiny or reflective surfaces, windows or glass, or anything flammable.
  • Mount the cube so it can't shift, with a safety cable when it hangs at height.
  • Have two ways to stop the beams at once, a main one and a backup: turning the safety key off stops them straight away, and so does an E-Stop's red button (the E-Stop Kit is on the gear page). Never bypass or disable the key, the interlock or the E-Stop.
  • Keep it away from children; teenagers (13 to 17) use it together with an adult.
  • Check your local rules for public shows.

The full list is in the manual's safety guidelines, and our free LaserCube Academy walks you from the box to your first show.

06

A word on safety

LaserCube is a professional show laser, not a toy: never aim it at people's eyes, at audiences or at aircraft, and never at anything flammable. More in our safety tips.

07

Frequently asked questions

Q01How many watts do I need for a laser light show?

Indoors, the Pro (3W or 6W) and the Ultra MK2 (6W or 10W) each suit audiences of up to about 1,000 people, and, on a tight budget, the WiFi 1.2W or 2.5W up to about 500; for a bigger crowd, run several cubes in sync. Outdoors, for a big audience, go with the Ultra MK2 10W, our most powerful model: more laser power makes the beams much more visible.

Q02What is the most powerful LaserCube?

The Ultra MK2 10W, with about 10,000 mW of full-color RGB light: 5,000 mW blue, 2,800 mW green and 2,800 mW red.

Q03Does more power make a bigger picture?

Not by itself. At full size, every Pro and Ultra MK2 draws a picture about 0.7 times as wide as the distance, whatever its power, and the WiFi about half. A bigger, farther picture is also dimmer: for buildings and long distances our team recommends the Ultra MK2.

Q04Can I use a high power laser light outdoors?

Yes, the Pro and Ultra MK2 are made for outdoor use too, after dark. Every beam must end on a solid surface, never in the sky. They're rated IP51, and IP63 with the rain cover fitted (light rain, not heavy rain); the Pro's rain cover isn't available yet, so don't use a Pro in the rain for now. For public shows, check your local rules.

Q05Do I need a license for a laser show?

LaserCube is fully legal and certified worldwide. Rules for shows differ by country, state and venue, and some places need a permit or a trained laser safety officer. In the US, LaserCube is certified through X-Laser, and a LaserCube bought in the USA comes with the FDA variance (issued by X-Laser). For public shows, check your local rules too.

See it for yourself

LaserCube is a portable, battery-powered RGB laser projector, and its show software, LaserOS, is free.

Explore the LaserCube lineup
★ 4.8/5 TRUSTPILOTFREE EXPRESS SHIPPING30-DAY RETURNS1-YEAR WARRANTY